Understanding and Fixing Vision Fitness Treadmill Error Code e5

Vision Fitness treadmills are among the most popular treadmills for home gyms. However, some users reported that Vision Fitness treadmills gave them error code e5.
If you are also troubled by this error code, here are a couple of troubleshooting tips to help you resolve this error code.

  • The Vision Fitness treadmill error code e5 means that the treadmill is malfunctioning.
  • One of the fastest solutions is to restart the Vision Fitness treadmill and check if the error has been corrected.
  • You can also reset the treadmill’s settings to its factory settings, but this may erase all your saved data.

PC problems? Solve them in minutes.

  • 1. Download and install ASR Pro
  • 2. Run a scan to find and fix errors
  • 3. Reboot your computer for the changes to take effect
  • Get better performance from your computer with this software - download it to fix your PC today.

    Run the troubleshooter

    1. Right-click the Start button on the Taskbar and select Settings.
    2. Select the Update & Security section.
    3. Click the Troubleshoot tab.
      Click the Troubleshoot tab.
    4. Scroll down to Fitness Equipment and select Fitness Equipment troubleshooter.
    5. Click the Run the troubleshooter button.
    6. Follow the instructions on the screen to complete the troubleshooting process.
      Follow the instructions on the screen to complete the troubleshooting process.

    PC problems? Solve them in minutes.

    Is your computer running slow, crashing, or giving you the dreaded Blue Screen of Death? Well, don't worry - there's a solution! ASR Pro is the ultimate software for repairing Windows errors and optimizing your PC for maximum performance. With ASR Pro, you can fix a wide range of common issues in just a few clicks. The application will detect and resolve errors, protect you from data loss and hardware failure, and optimize your system for optimal performance. So don't suffer with a slow or crashed computer any longer - download ASR Pro today!

  • 1. Download and install ASR Pro
  • 2. Run a scan to find and fix errors
  • 3. Reboot your computer for the changes to take effect

  • Check your hardware

    1. The e5 error code is usually caused by damaged hardware.
      The e5 error code is usually caused by damaged hardware.
    2. Remove the power cord from the treadmill, and check if that fixes the issue.
    3. Clean your treadmill
    4. Remove the treadmill’s front cover.
    5. Clean the roller assembly.
      Clean the roller assembly.
    6. The e5 error code might also be caused by dust buildup.
    7. Reinstall your treadmill software
      For an error code e5, it’s not usually possible to fix the software issue.
    8. Users have to remove the treadmill’s front cover and reinstall the treadmill software.

    Check power settings

    1. Check that your treadmill’s power cord is plugged in securely and not frayed.
    2. Ensure that it’s plugged in to an outlet which is not overloaded with other devices.
      Ensure that it's plugged in to an outlet which is not overloaded with other devices.
    3. Then, press the Stop button on the treadmill.
    4. Press the Power button on the treadmill.
    5. Wait for the treadmill to reboot.
    6. Check whether the error code e5 still appears.
      Check whether the error code e5 still appears.
    Get better performance from your computer with this software - download it to fix your PC today.

    Reset your treadmill

    1. First, disconnect the power cord from your treadmill.
      First, disconnect the power cord from your treadmill.
    2. Then, disconnect your treadmill from the power source.
    3. Press the power button on the control panel until the console lights flash quickly.
    4. Then, press the power button again, and your treadmill should turn on.
    5. Perform a calibration test
      If your treadmill’s console still displays error code E5, try performing a calibration test first.
    6. Press the Quick Start button on the control panel.
    7. Then, press and hold the Quick Start button again.
      Then, press and hold the Quick Start button again.
    8. Press the Start button on your treadmill console.
    9. Press the Quick Start button on your treadmill console.
    10. It will display an error message.
      It will display an error message.
    11. Press the Quick Start button again.
    12. Press the Start button on your treadmill console.
    13. Press the Quick Start button on your treadmill console.
    14. Your treadmill console will display an “OK” message.
      Your treadmill console will display an "OK" message.
    15. Perform a maintenance test
      If your treadmill is still displaying error code E5, try performing a maintenance test next.
    16. Press the Quick Start button on your treadmill console.
    17. Press the Start button on your treadmill console.
    18. Press the Quick Start button on your treadmill console.
    19. It will display an error message.
      It will display an error message.
    20. Press the Quick Start button again.
    21. Press the Start button on your treadmill console.
    22. Press the Quick Start button on your treadmill console.
    23. It will display an “OK” message.
      It will display an "OK" message.
    Scroll to Top