PSpice is a circuit simulation program that allows users to simulate various circuit components. The program works on Microsoft Windows, Macintosh, and Linux.
Users sometimes encounter the pspice subcircuit error that issue when trying to run a circuit simulation.
The pspice subcircuit error issue prevents users from running simulations, so in today’s article, we will explore a few possible resolutions for this pspice subcircuit error issue.
- The pspice subcircuit error occurs when you have insufficient memory or misconfigured settings.
- The error can be fixed by updating to the latest version of PSpice and running a repair.
- Also, you can try out uninstalling and reinstalling the program by following our step by step guide.
PC problems? Solve them in minutes.
Update PSpice
- Update PSpice from its website.
- PSpice requires a strong CPU and RAM to work.
- Install a good graphics card with 4 GB RAM.
Check for PSpice installation
- Make sure that you have the latest version of PSpice installed on your computer.
- Also, make sure that you install and uninstall PSpice software properly.
PC problems? Solve them in minutes.
Is your computer running slow, crashing, or giving you the dreaded Blue Screen of Death? Well, don't worry - there's a solution! ASR Pro is the ultimate software for repairing Windows errors and optimizing your PC for maximum performance. With ASR Pro, you can fix a wide range of common issues in just a few clicks. The application will detect and resolve errors, protect you from data loss and hardware failure, and optimize your system for optimal performance. So don't suffer with a slow or crashed computer any longer - download ASR Pro today!
Check PSpice signal traces
- Open PSpice software and launch the Circuit / Schematic Editor.
- Right-click the circuit (or schematic) and choose “View” option.
- Check whether the signal traces are shorted.
- Check if the signal lines are connected correctly.
- Check wiring polarity.
- Check that the signal traces are routed properly according to the schematic.
- Check that the power traces are connected properly in the schematic.
- Check whether there are any crossed power or signal traces.
Run an SFC scan
- To do that, press the Windows key + S keyboard shortcut.
- Type cmd in the search box.
- Click Run as administrator under Command prompt in the search results.
- Enter sfc/scannow in the prompt, and press the Return key.
Run the DISM /Online /Cleanup-image /Restorehealth command
- To run DISM, open the Command prompt as administrator.
- Next, enter DISM /Online /Cleanup-image /Restorehealth in the prompt’s window.
- Press the Enter keyboard button.
Reset PSpice
- Press the Windows key + R keyboard shortcut to open Run.
- Input the command †̃devmgmt.msc’ into Run and click OK to open the Device Manager.
- Right-click the PSpice driver and select Uninstall device.
- Click Uninstall to confirm the action.
- Then reinstall the PSpice driver. To do that, press the Windows key + R keyboard shortcut to open Run.
- Input the command †̃devmgmt.msc’ into Run and click OK to open the Device Manager.
- Right-click the PSpice driver and select Scan for hardware changes.
- Click Scan for hardware changes.
- Then press the Windows key + R keyboard shortcut to open Run.
- Input the command †̃devmgmt.msc’ into Run and click OK to open the Device Manager.
- Right-click the PSpice driver and select Update driver.
- Select the Search automatically for drivers on the Internet option.
- Click the Have Disk option.
- Then press the Windows key + R keyboard shortcut to open Run.
- Input the command †̃msdev\’ into Run and click OK to open the Microsoft Device Driver Search utility.
- Select the option †̃Let me pick from a list of device drivers on my computer’.
- Select the PSpice driver from the drop-down list.
- Then click the Next button.
- Then click the Finish button.
